EXTRUDED Tubes. Tapes. Profiles
 
Products Range ...
 
Insulation
 
Heat shrinkable tubes/sleeves
 
  • Lay Flat P.V.C. Heat Shrink: Sleeves for low tension, red yellow blue balck

Description
Heat shrinkable sleeving method of providing insulation is the latest in modern technology and is superior to conventional methods like typing, painting etc. It provides perfect electrical insulation to the Busbars A thin wall, low cost, heat shrinkable material offering good electrical and mechanical characteristics. It is produced from a specially formulated polyvinyl chloride material which is expanded during the manufacturing process. When exposed to heat in excess of 150°C, it will shrink rapidly to 40% of the supplied dimension, uniformly, conforming to the contour of the object being covered.

Applications

  • Insulation and marking of Bus Bar in control panels—
  • Insulation and jacketing of batteries, capacitors and similar objects –
  • protective covering for precision machine parts and cutting tool –
  • wire and cable identification –
  • insulation of tools against electrical shocks –
  • a vast range of applications in the production of industrial equipment, toys, sporting goods, electronics, medical and consumer products.

Features

  • Tubing available in Continous Roll Form
  • Tubing have excellent mechanical strength, chemical resistance and heat dissipation
  • Standard four colours - Red, Yellow, Blue, Black. (Opaque).
  • Fast Shrinkage
  • Low Cost
  • Long Shelf life and Stability
  • Operating Temperature 90°C

BUSBAR APPLICATION :-

  • THICKNESS : 0.2 mm ± 0.03 mm.
  • COLORS : RED, YELLOW, BLUE, BLACK.
  • UNIT : 50 Meters Roll.

 

PROPERTIES :-

  • a) Working Temperature : 90ºC
  • b) Dielectric Strength : 20 KV/mm
  • c) Insulation Resistance : 20 x ohms at 500 V D C
  • d) Tensile Strength : Min 400 Kg/cm
  • e) Ultimate Elongation : Min 11%
  • f) Chemical Resistance : Good
  • g) Fire Resistance : Self Extinguishing
  • h) Shrinking Temperature : 150ºC - 170ºC for 4-5 minutes.
  • i) Mechanical Strength : Excellent
  • j) Heat Dissipation : Excellent

The chart below will give you the complete idea of the BUSBAR sizes & the right size of PVC HEAT SHRINKABLE TUBING for the respective size of BUSBAR :-

Sr. No BUSBAR SIZE SUITABLE SIZE OF SLEEVE ( Width )
1 8 x 4 , 6 x 6, 10 x 3 17 mm
2 12 x3, 9 x 6 20 mm.
3 15 x 3, 12 x 6 25 mm.
4 20 x 3, 18 x 6, 16 x 3 30 mm.
5 25 x 3, 20 x 6 35 mm.
6 26 x 6, 25 x 9 41 mm.
7 30 x 10, 30 x 6, 25 x 12 48 mm.
8 38 x 6, 30 x 12 55 mm.
9 40 x 10, 40 x 6, 38 x 12, 38 x 9 61 mm.
10 50 x 6 73 mm.
11 50 x 12, 50 x 10 81 mm.
12 75 x 6 93 mm.
13 75 x 12 103 mm.
14 90 x 12, 90 x 6 110 mm.
15 100 x 9, 100 x 6 128 mm.
16 100 x 12 140 mm.
17 125 x 10, 125 x 6 170 mm.
18 150 x 12, 150 x 10, 150 x 6 190 mm.
19 200 x 12 230 mm.
 

^Top

----------------------------------------------------------------------------------------------------------------------
 
 
  • P.V.C. Heat Shrink (air filled): Heavy wall tubes for high tension insulation uptp 36 kv
 

Description
Most affordable and tailor made shrink tubes possible. Can be made in any

  • size ranging from 0.5 mm to 150 mm ID
  • any thickness 0.2mm to 6mm
  • any colour – opaque / transparent/ translucent
  • various hardness/softness

FEATURES :-

  • Made from plasticised PVC compound has high gloss mirror finish surface
  • Tubing available in continuous roll form
  • Besides having an excellent mechanical strength, chemical resistance and heat dissipation its also act as shock absorber and can used for cushioning various metallic objects, due its soft and flexible nature

ADVANTAGES :-

  • Higly economical
  • Customisable
  • Minmum order Quantity – very low

Applications

  • High Tension  upto 36 kv Insulation and marking of Bus Bar in control panels—
  • Sleeves for metal  rollers / conveyors used in various industries such as plywood
  • protective covering for precision machine parts and cutting tool –
  • wire and cable identification –
  • insulation of tools against electrical shocks –
  • a vast range of applications in the production of industrial equipment, toys, sporting goods, electronics, medical and consumer products.

^Top

----------------------------------------------------------------------------------------------------------------------
 
 
  • Polyolefin Heat Shrink: Tubes for high tension (36kv) fire retardant, 125c,flexible,continuous length, compact,3:1 shrink ratio, adhesive lined, anti tracking
 

Description
Flame-retardant Heat Shrinkable Tube has excellent un-flammability, and insulation. The shrinking temperature is very low and it can shrink very quickly. It is suitable for various electric insulation and bonding of cables and connectors and widely applied for connecting or end-handing, electric wire, insulating and harness of electric wire, corrosion proof of metallic rods or tubes, and antenna protection.

Material : Irradiated, cross- linked, thermally stabilized flame retarded polyolefin
Available colors : Black, Red, White, Yellow, Green, Clear or upon requirements
Shrinking ratio : 2 :1
Rated voltage : 600v

Test Item                    Value
Shrinking Temperature : Start at 100° C
Operating Temperature : -55°C to I25°C
Radial Shrinkage : >50%
Longitudinal Shrinking Ratio : + 5%
Tensile Strength : MM pa
Test Item : Value
Volume Resistance : 1014cm
Dielectric Strength : 20 kv/mm
Flammability : ULvw-1

THINWALL SIZES

Size As Supplied(mm) After Recovery (mm) Standard Package Application Range
(mm) I.D. W.T. Max. I.D. W.T. (m/spool) (mm)
00.8 1.0 + 0.2 0.13 + 0.05 0.45 0.22 + 0.05 200 0.4~0.8
01.0 1.5 + 0.3 0.16 + 0.05 0.60 0.28 + 0.05 200 0.5~0.9
01.5 2.0 + 0.3 0.16 + 0.05 0.80 0.30 + 0.05 200 0.7~1.4
02.0 2.5 + 0.3 0.16 + 0.05 1.00 0.35 + 0.05 200 1.0~1.8
02.5 3.0 + 0.3 0.16 + 0.05 1.25 0.38 + 0.05 200 1.2~2.3
03.0 3.5 + 0.4 0.20 + 0.05 1.50 0.40 + 0.05 200 1.5~2.7
03.5 4.0 + 0.4 0.20 + 0.05 1.75 0.45 + 0.05 200 1.7~3.6
04.0 4.5 + 0.4 0.20 + 0.05 2.00 0.47 + 0.08 200 2.0~3.6
05.0 5.5 + 0.4 0.20 + 0.05 2.50 0.55 + 0.08 100 2.5~4.5
06.0 6.5 + 0.4 0.22 + 0.05 3.00 0.55 + 0.08 100 3.0~5.4
07.0 7.5 + 0.4 0.28 + 0.05 3.50 0.60 + 0.08 100 3.5~6.3
08.0 8.5 + 0.5 0.28 + 0.05 3.50 0.60 + 0.08 100 4.0~7.2
09.0 9.5 + 0.5 0.30 + 0.08 4.50 0.60 + 0.08 100 4.5~8.0
010 10.5 + 0.5 0.30 + 0.08 5.00 0.60 + 0.08 100 5.0~9.0
011 11.5 + 0.5 0.30 + 0.10 5.50 0.65 + 0.08 100 5.5~10
012 12.5 + 0.5 0.30 + 0.10 6.00 0.65 + 0.08 100 6.0~11
013 13.5 + 0.5 0.33 + 0.12 6.50 0.65 + 0.08 100 6.5~12
014 14.5 + 0.5 0.33 + 0.12 7.00 0.75 + 0.08 100 7.0~12
015 15.5 + 0.6 0.35 + 0.15 7.50 0.75 + 0.08 100 7.5~14
016 16.5 + 0.6 0.35 + 0.15 8.00 0.80 + 0.15 50 8.0~15
018 19.0 + 0.6 0.40 + 0.15 9.00 0.80 + 0.15 50 9.0~17
020 20.5 + 0.6 0.40 + 0.15 10.00 0.80 + 0.15 50 10~19
022 22.6 + 0.7 0.45 + 0.15 11.00 0.95 + 0.15 50 11~21
025 25.6 + 0.7 0.45 + 0.15 12.00 0.95 + 0.15 50 12~24
028 29.0 + 0.7 0.45 + 0.15 13.00 0.95 + 0.15 50 14~29
030 37.5 + 0.7 0.50 + 0.15 15.00 1.00 + 0.15 50 15~29
035 38.0 + 0.7 0.50 + 0.15 16.00 1.00 + 0.15 50 17~34
040 40.5 + 0.7 0.50 + 0.15 20.00 1.00 + 0.15 50 20~39
050 50.5 + 0.7 0.50 + 0.15 25.00 1.00 + 0.15 25 25~49
070 70.5 + 0.7 0.50 + 0.15 35.00 1.00 + 0.15 25 35~69
076 76.5 + 0.7 0.50 + 0.15 38.00 1.00 + 0.15 25 38~74
100 100.5 + 0.7 0.50 + 0.15 50.00 1.00 + 0.15 25 50~99

^Top

----------------------------------------------------------------------------------------------------------------------
 
 
P.V.C Sleeves/ Tube: Thin/ heavy wall,0.3mm to 300 mm, all colours, transparent & opaque, as per IS specifiaction suitabel for railways/defence
 

Over view
PVC is present in virtually all areas of human activity. PVC is a chlorinated hydrocarbon polymer - its basic building blocks are chlorine, carbon and hydrogen. These elements are obtained from sea salt (sodium chloride) and crude oil or natural gas, both of which are mixtures of hydrocarbons. PVC is a thermoplastic. This means that it softens upon heating and hardens upon cooling.
It was first made in 1872. However, the first PVC wasn't very good. When heated or exposed to sunlight, the molecules broke up and an acidic gas was given off. Decades later, scientists discovered that chemicals could be added which would make it stable and resistant to light and heat. This meant good-quality PVC products could be manufactured.
PVC was first used instead of rubber to insulate the wires in electrical cables. This was about 60 years ago, during Word War II, when rubber was in short supply. Since then it has replaced rubber for insulation and found many other applications. These days, it's the second most popular plastic in the world.
In more than 60 years of production and commercial use, PVC has contributed greatly to the development of modern life. It has also become one of the most thoroughly researched materials. Its manufacture is closely regulated and results of life cycle analyses published so far show that PVC is a safe product in its production, use and disposal

Description
We are engaged in the manufacture of various TUBES/SLEEVES. All the products are widely used in different industries. The high demand is due to its features of environment friendliness, rust resistance, UV resistance, flexibility and economical. We offer highly demanded PVC sleeves in different shapes and sizes within the range of 0.3 mm to 200 mm. The thickness and colours of the product can be customized as per the specific requirements of our clients.

FEATURES and OPTIONS OFFERED :-

  • Size – 0.30mm  to 150.00mm ID
  • Wall thick – 0.2mm to 6mm
  • Rigid and semi rigid tubes and profiles
  • Co-extrusions with different colours on the same surface
  • Multi-Hollow and Other Complicated Shapes
  • Colour - Excellent Glass Like Transparency to complete Opacity in any colourand shade , dual coloured, florescent, glow in dark.
  • Custom surface - semi matte, matte, glossy, mirror finish , pearl,
  • For Indoor or Outdoor Use
  • UV resistance
  • Fire resistance
  • Close Dimensional Tolerance
  • Different Cutting configurations as per customer requirements (Cut-to-length or Rolls)
  • Wide range of customized formulations as per operating requirements
  • Physically and chemically stable
  • High production capability upto 2 metric tons daily
  • Customized Packing
  • Shipment optimization, multi station dispatch
  • Ware-housing and Door-step delivery

Application

  • Our tubes have been accepted reputed organisation such  ISRO , defence, railways, electricity board, telecommunication and various OEMs such as Philips, Siemens, L&T, Exide, Ariva, Indian Explosive Limeted, Eveready industries
  • Electrical insulation
  • Cable management (colour coding, feruling/marking/printing, binding, insulation)
  • Automobile Harnessing
  • Handles for plastic/paper bags and leather bags(replacement of cotton ropes)
  • Toys
  • Sports equipment
  • Fishing tackles
  • Foot Wear
  • Corrosion and abrasion proofing of metal stands and hose pipes
  • Submersible pump winding
  • Transmission of various kinds of fluids like petrol, Diesel, Oils, Water and chemicals
  • For specific requirements, please let us know

^Top

 
----------------------------------------------------------------------------------------------------------------------
 
Non -adhesive Tapes: inches, 1 inches, glossy/mat, red, yellow, blue, black, green
 

We manufacture a range of non adhesive PVC tapes from pure virgin plasticized PVC compounds which find application in various fields. These tapes are made in various widths, from 5mm to 100mm. The thickness and colours of the product can be customized as per the specific requirements of our clients.

Standard sizes - 12.5 / 19 / 25 / 40 / 50 mm wide
Standard thickness - 0.15 mm - 0.20 mm
Standard length -/ 10 / 20 / 25 / 50 metres. Per roll.
Standard colours - All the electrical code colours like Red/ Yellow/ Blue / Black/ Green

Application

  • Electrical insulation
  • Automobile wiring harness
  • Winding of current transformers
  • Cable jointing kits
  • Cable management
  • Warning / Caution / masking
 
----------------------------------------------------------------------------------------------------------------------
 
Silicone Rubber Sleeves: Very flexible, suitable for high temperature (300c) applications
 

Description

  • We deal in  wide range of coloured & transparent Silicone rubber sleeves.
  • Sizes available from: 0.5 mm (ID) to 100mm (ID)
  • Excellent heat resistance: up to 350°C.
  • Excellent electrical insulating properties.
  • Non- toxic & Halogen Free.

Application :

  • Biomedical & Pharmaceutical, Appliances.
  • High temperature electrical insulation applications.
  • Fluid delivery systems & many more
----------------------------------------------------------------------------------------------------------------------
 
 
PTFE (Teflon) Sleeves: Suitable for high temperature applications, fire retardant

Description
Flame Retardant : PTFE insulation is Fire proof and Flame proof. In case of short circuit or fire PTFE does not damage.

Heat Resistant : PTFE insulation is heat resistant. If some time it has to carry heavier load than its capacity it will not damage. It is also cold Resistant, it with stand from – 60oC upto 500oC.

Save Current : PTFE sleeves  have a lower resistance in comparison of other materials In V resistant, this wiring saves electricity.

Save Space : The diameter of PTFE sleeves are much less for the equivalent rate other insulating materials.

Long Lasting : PTFE sleeves have longer life than other insulating materials . PTFE Insulation is mechanical stronger than others. These sleeves are fire proof, heat proof, moisture proof, chemical proof and fungus proof, etc.

 

^Top

----------------------------------------------------------------------------------------------------------------------
 
 
Glass Fibre Tubes / Sleeves: Varnished/unvarnished/pvc coated(china)
 

Fibreglass sleeves has excellent dielectricity, automatic quench and softness, widely used in the insulation protection of internal line cluster in h&n machinery, household electrical appliances, electroheat device, special illuminations, tv set and electric instruments.

Product Description -

  • Material: Non-alkali fiberglass braided silicone rubber
  • Treated by thermal process and vulcanization
  • Good choice for electrical machinery, special bulbs, electrical rich cookers and other appliances' insulation
  • Standard color: White
  • Standard packing: 100 meters/roll
  • Approvals: UL and RoHS
  • Standard voltage: 7KV
  • Heat resistance
  • Normal condition minimum value: 7.0kV/min
  • Normal condition average value: 8.0kV/min
  • Minimum thickness: 0.40mm

Application :

  • Winding Wire Coating Insulation
  • Chemistry : Hybrid Insulation
  • Material : Yarn
  • Thermal Rating : 200 200

^Top

----------------------------------------------------------------------------------------------------------------------
 
Home          |         Contact          |          Enquiry
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Copyright Ajay Plastics.  2012. All Rights Reserved.                                                                                                                   Designed & Promoted by : www.yellowpageskolkata.com